Please use this identifier to cite or link to this item: https://repositori.uma.ac.id/handle/123456789/19167
Title: Analisis Perbandingan Pasir Pantai Kasan Dengan Pasir Pantai Labu Terhadap Kuat Tekan Beton
Other Titles: Comparison Analysis of Sand with Kasan Beach Pumpkin Beach Sand Against Concrete Compressive Strength
Authors: Wahyudi, Muhammad Rizky
Keywords: concrete;kasan beach;labu beach;compressive strength of concrete;water cement factor;beton;pantai kasan;pantai labu;kuat tekan beton;faktor air semen
Issue Date: 27-Dec-2022
Publisher: Universitas Medan Area
Series/Report no.: NPM;178110029
Abstract: Pasir adalah bahan bangunan yang banyak dipergunakan dari struktur paling bawah hingga paling atas dalam bangunan. Baik sebagai pasir urug, adukan hingga campuran beton. Perencanaan campuran (mix design) dilakukan mengacu pada SNI 03- 2834-2000. Perencanaan yang dilakukan berdasarkan hasil pemeriksaan dari masing-masing bahan sebelumnya untuk merencanakan pencampuran beton, mulai dari semen, agregat halus, agregat kasar dan air. Hasil dari mix design ini berupa perbandingan antara bahan-bahan penyusun beton yang selanjutnya akan digunakan sebagai dasar dalam pembuatan benda ujipasir pantai kasan dapat digunakan sebagai campuran adukan beton dengan acuan control beton normal 15 Mpa – 30 Mpa dengan nilai kuat tekan yang dihasilkan 21,460 Mpa pada umur 14 hari dalam hal ini agregat halus pasir pantai mencapai beton normal 15 Mpa – 30 Mpa, syaratnya agregat halus pasir pantai harus dilakukan treatmen yaitu dengan cara dicuci terlebih dahulu.hasil penelitian tersebut beton dengan campuran agregat halus pasir pantai kasan dengan umur 7 hari dengan rata-rata sebesar 19,685 Mpa. Kuat tekan umur 14 hari dengan rata-rata sebesar 21,460 Mpa. hasil penelitian tersebut beton dengan campuran agregat halus pasir pantai labu dengan umur 7 hari dengan rata-rata sebesar 16,730 Mpa. Kuat tekan umur 14 hari dengan rata-rata sebesar 19,195 Mpa. Sand is a building material that is widely used from the lowest structure to the top of the building. Good as backfill, mix until the concrete mix. Mix design is carried out referring to SNI 03-2834-2000. Planning is carried out based on the results of the examination of each previous material to plan the mixing of concrete, starting from cement, fine aggregate, coarse aggregate, and water. The results of this mix design are in the form of a comparison between the concrete constituent materials which will then be used as the basis for making the test object. Kasan beach sand can be used as a concrete mix with a normal control reference of 15 Mpa – 30 Mpa with the resulting compressive strength value of 21.460 Mpa at the age of 14 days in this case the fine aggregate of beach sand reaches normal concrete 15 Mpa – 30 Mpa, the condition is that the fine aggregate of beach sand must be treated by washing it first. an average of 19.685 MPa. The compressive strength of 14 days with an average of 21.460 MPa. the results of the study was concrete with a mixture of a fine aggregate of pumpkin beach sand with an age of 7 days with an average of 16,730 MPa. The compressive strength of 14 days with an average of 19,195 MPa.
Description: 96 Halaman
URI: https://repositori.uma.ac.id/handle/123456789/19167
Appears in Collections:SP - Civil Engineering

Files in This Item:
File Description SizeFormat 
178110029 - Muhammad Rizky Wahyudi - Chapter IV.pdf
  Restricted Access
Chapter IV799.94 kBAdobe PDFView/Open Request a copy
178110029 - Muhammad Rizky Wahyudi - Fulltext.pdfCover, Abstract, Chapter I, II, III, V, Bibliography2.15 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.